Test Tone Generator

Create a sine-wave test signal with chosen frequency, duration and gain.

Your workspace

Server processing

Review the example values, then run the tool.

The Test Tone Generator creates a synthetic sine-wave audio signal based on your specific parameters. This tool is useful for calibrating audio equipment, testing signal chains, or generating reference tones for technical analysis.

Configuring your test signal

  1. Enter the desired length of the tone in seconds, up to a maximum of 300 seconds.
  2. Specify the frequency in Hertz (Hz) between 20 and 20,000 to define the pitch of the generated sine wave.
  3. Download the resulting PCM WAV file, which contains the pure sine wave synthesized according to your gain and frequency settings.

Understanding the output

The generated file is a standard PCM WAV audio file containing a pure sine wave. Because this tool synthesizes the audio directly, the output is consistent and free from external noise or recording artifacts.

Operational limits

The tool allows for a single generated tone up to 300 seconds in length. All generated files are stored temporarily on the server and will expire 15 minutes after creation, so ensure you download your result promptly.

Standard reference tone

Duration: 5, Frequency: 440, Gain: -20

A 5-second, 440 Hz sine wave (A4 note) at -20 dB volume.

Frequently asked questions

Can I generate multiple tones in one file?

No, this tool generates a single, continuous sine wave based on the parameters provided.

What is the maximum gain I can set?

The gain is limited to a range between -60 dB and -6 dB to prevent digital clipping in the output file.

Continue your workflow